Right Control Switch Test
Turn ignition off. Remove right power window switch, but leave electrical connector connected. Turn ignition on. Check for voltage at right window switch as shown in the RIGHT CONTROL SWITCH VOLTAGE table. If voltages are within specification, go to appropriate test under TROUBLE SHOOTING , if applicable. If voltages are not within specification, replace right power window switch.
RIGHT CONTROL SWITCH VOLTAGE (1)
| Switch Position | Red Wire | Green Wire | ||
|---|---|---|---|---|
| Up | 12 Volts | 0 Volts | ||
| Down | 0 Volts | 12 Volts | ||
|
||||