Main Switch Test
With ignition off, remove main switch. Leave electrical connector connected. Measure voltage at indicated switch terminals and positions. See MAIN SWITCH VOLTAGE table. If voltage is as specified, go to appropriate procedure under TROUBLE SHOOTING , if applicable. If voltage is not as specified, replace main switch.
MAIN SWITCH VOLTAGE
| Switch Position | Wire Color | (1) Volts | ||
|---|---|---|---|---|
| Left Up | GRN/BLU | 12 | ||
| Left Up | RED/BLU | 0 | ||
| Left Up | GRN/WHT | 0 | ||
| Left Up | RED/WHT | 0 | ||
| Left Down | GRN/BLU | 0 | ||
| Left Up | RED/BLU | 12 | ||
| Left Up | GRN/WHT | 0 | ||
| Left Up | RED/WHT | 0 | ||
| Left One-Touch | GRN/BLU | 0 | ||
| Left Up | RED/BLU | 12 | ||
| Left Up | GRN/WHT | 0 | ||
| Left Up | RED/WHT | 0 | ||
| Right Up | GRN/BLU | 0 | ||
| Left Up | RED/BLU | 0 | ||
| Left Up | GRN/WHT | 12 | ||
| Left Up | RED/WHT | 0 | ||
| Right Down | GRN/BLU | 0 | ||
| Left Up | RED/BLU | 0 | ||
| Left Up | GRN/WHT | 0 | ||
| Left Up | RED/WHT | 12 | ||
| Right One-Touch | GRN/BLU | 0 | ||
| Left Up | RED/BLU | 0 | ||
| Left Up | GRN/WHT | 0 | ||
| Left Up | RED/WHT | 12 | ||
|
||||