Right Switch (Passenger Side) Test
Turn ignition off. Remove right switch, but leave electrical connector connected. Turn ignition on. Measure voltage at indicated switch terminals and positions. Refer to RIGHT SWITCH VOLTAGE table. If voltage is as specified, go to the appropriate procedure under TROUBLE SHOOTING , if applicable. If voltage is not as specified, replace right switch.
RIGHT SWITCH VOLTAGE (1)
| Switch Position | Red Wire | Green | ||
|---|---|---|---|---|
| Up | 12 Volts | 0 Volts | ||
| Down | 0 Volts | 12 Volts | ||
|
||||