Fuel System Pressure Release
- Remove fuel tank cap. Using Fuel Pressure Gauge (T80L-9974-B), release pressure from system at pressure relief valve (Schrader valve), located on fuel injection manifold rail.
- If fuel pressure gauge is not available, disconnect Inertia Fuel Shutoff (IFS) switch. See INERTIA FUEL SHUTOFF (IFS) SWITCH table. Remove fuel cap to release fuel tank pressure. Crank engine for 15 seconds to release system pressure.
INERTIA FUEL SHUTOFF (IFS) SWITCH LOCATION
| Application | Location |
|---|---|
| Windstar | Below Right Side Of Instrument Panel, Behind Trim Panel |