LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1996 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Body & Frame >> Windows >> Power Window System >> Testing >> One-Touch Down Feature Inoperative
April 5, 2026: LEMON Manuals is launched! Read the announcement.

One-Touch Down Feature Inoperative

  1. Power Supply To One-Touch Module Check

    Ensure normal power window operate properly. Remove driver's door trim panel. Access module located in driver's door. Turn ignition switch to RUN position. Check for battery voltage on Pink or Light Blue/Black wire at one-touch down module harness connector. If battery voltage exists, go to next step. If battery voltage does not exist, repair open in Pink or Light Blue/Black wire between instrument panel fuse block and one-touch down module.

  2. One-Touch Circuit Ground Check

    Measure resistance between Black wire at one-touch down module harness connector and ground. If resistance is 5 ohms or less, replace one-touch down module. If resistance is greater than 5 ohms, repair open in Black wire. Retest system.
scientia non olet · About LEMON Manuals