LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1996 >> Probe Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (Engine Controls - Basic Testing - 2.5L) >> Ignition Checks >> Checks >> Check Power To Distributor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Power To Distributor

WARNING: This page is about a different variant/trim than selected.

Turn ignition on. Measure voltage at VPWR terminal (Red/Black wire) of distributor 3-pin connector. If voltage is more than 10 volts, replace distributor. If voltage is 10 volts or less, repair VPWR wire between distributor and ignition switch.

NOTE: To identify ignition system type by application, see the ENGINE/VIN ID article.
scientia non olet · About LEMON Manuals