LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1997 >> Contour Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.0L >> Drive Cycles >> Monitor Repair Verification Drive Cycles >> Comprehensive Component Monitor Repair Verification Drive Cycle
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Comprehensive Component Monitor Repair Verification Drive Cycle

  1. Refer to and complete the vehicle check and preparation before initiating the following repair verification steps. See VEHICLE CHECK/PREPARATION .
  2. Start the engine and go through the entire OBD II drive cycle until the comprehensive component monitor shows the completion status by clearing the code P1000 on the scan tool.
  3. If the entire OBD II drive cycle has been performed and the comprehensive component monitor check has not completed, rerun quick test. See QUICK TEST .

scientia non olet · About LEMON Manuals