LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1997 >> Contour Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Module Communications Network) >> Communication Network Diagnostics >> Module Version Identification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module Version Identification

WARNING: This page is about a different car, the 1997 Ford Ranger and 1997 Ford Aerostar. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: This procedure may be used to verify correct version of module being tested.
  1. Connect New Generation Star (NGS) scan tester on Data Link Connector (DLC) and perform proper hook-up procedure. See EQUIPMENT HOOK-UP  .
    NOTE: If instructed to retrieve PID from a specified test procedure, ensure ignition is in proper position as listed in test procedure or the test will fail.
  2. Turn ignition on unless otherwise instructed by specified test procedure. Rotate dial on scan tester to DIAGNOSTIC DATA LINK menu and press trigger.
  3. Rotate dial on scan tester to highlight the desired module you wish to access and press trigger. Rotate dial on scan tester to highlight menu MODULE IDENTIFICATION and press trigger. Module version information will be displayed.
scientia non olet · About LEMON Manuals