Power Window Switch

Remove window switch from vehicle. See appropriate POWER WINDOW SWITCH under REMOVAL & INSTALLATION . Using ohmmeter, check for continuity between switch terminals in specified switch positions. See POWER WINDOW SWITCH TESTING TABLE. See Fig 1 , Fig 2 or Fig 3 . Replace power window switch if it does not test as specified.

POWER WINDOW SWITCH TESTING

Switch Position

⁽¹⁾ Continuity Between Terminals No.

Neutral

A-1, A-2, A-3, A-4, A-6, A-7, A-8, A-9 & B-3

Right Front Up

A-2 & B-2; A-1 & B-3

Right Front Down

A-1 & B-2; A-2 & B-3

Right Rear Up

A-4 & B-2; A-3 & B-3

Right Rear Down

A-3 & B-2; A-4 & B-3

Left Rear Up

A-9 & B-2; A-8 & B-3

Left Rear Down

A-8 & B-2; A-9 & B-3

Left Front Up

A-6 & B-2; A-7 & B-3

Left Front Down

A-7 & B-2; A-6 & B-3

⁽¹⁾	With switch in NEUTRAL position, terminal No. B-2 is isolated from all other terminals.

Fig 1: Identifying Master Power Window Switch Terminals (Switch Side) Connector "A"

Courtesy of FORD MOTOR CO.

Fig 2: Identifying Master Power Window Switch Terminals (Switch Side) Connector "B"

Courtesy of FORD MOTOR CO.

POWER WINDOW SWITCH TESTING

Switch Position

⁽¹⁾ Continuity Between Terminals No.

Neutral

C-1 & C-6; C-3 & C-7

C-1 & C-6; C-2 & C-7

Down

C-1 & C-2; C-3 & C-7

⁽¹⁾	With switch in NEUTRAL position, terminal No. C-2 is isolated from all other terminals.

Fig 3: Identifying Passenger Power Window Switch Connector Terminals (Harness Side)

Courtesy of FORD MOTOR CO.