Mirror Control Switch
Turn ignition off. Remove mirror control switch, leave harness connected to switch. See MIRROR CONTROL SWITCH under REMOVAL & INSTALLATION. Turn ignition on. Backprobe mirror switch connector for battery voltage between ground and indicated wire color while operating switch as specified. See MIRROR SWITCH TEST TABLE. If switch fails any portion of test, replace switch.
MIRROR SWITCH TEST
| Switch Position | Battery Voltage | |
|---|---|---|
| Left Mirror | ||
| Up | BRN | |
| Down | LT GRN & BRN/YEL | |
| Left | LT GRN & BRN | |
| Right | BRN/YEL | |
| Right Mirror | ||
| Up | BRN | |
| Down | LT GREEN/BLK & BRN/BLK | |
| Left | LT GRN/BLK & BRN | |
| Right | BRN/BLK | |