LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1997 >> Probe Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.0L >> Drive Cycles >> EGR Monitor Repair Verification Drive Cycle
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EGR Monitor Repair Verification Drive Cycle

  1. Refer to and complete the Vehicle Application Preparation For OBD-II Drive Cycle in this section before initiating the following repair verification steps. See VEHICLE CHECK/PREPARATION .
  2. Start the engine and drive the vehicle for 24 minutes.
    • Drive in stop-and-go traffic for 19 minutes with at least four idle periods.
    • Accelerate to 40 MPH (64 km/h) at more than 1/2 throttle. Maintain speed for 1 minute. Maintain speed for one minute.
    • Accelerate on highway to 55 MPH (89 km/h). Maintain speed for 4 minutes.
  3. Repeat quick test. See QUICK TEST .