Section 16 (Keyless Entry System - Remote): Programming: Keypad
WARNING: This page is about a different car, the 1997 Lincoln Mark VIII. However, it is still accessible from the selected car via links, so may be relevant.
- Enter 5-digit permanent entry code at keypad. Within 5 seconds of pressing last digit, press 1/2 button on keypad to activate programming mode. Enter new 5-digit keypad code. To associate new code with personality position 1, press 1/2 button within 7.5 seconds of entering last digit of new code.
- To associate new code with personality position 2, press 3/4 button within 7.5 seconds of entering last digit of new code. Door locks will lock and unlock confirming new code is programmed. If additional codes are to be programmed, begin entering code within 7.5 seconds of pressing last button.
- After all new keypad codes are programmed:
- Remote transmitters can be programmed within 7.5 seconds of entering last keypad code.
- Press keypad buttons 7/8 and 9/0 simultaneously to exit program mode.
- Wait 7.5 seconds and driver's door module will exit program mode.