LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1997 >> Taurus SHO >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Module Communications Network System >> Communication Network Diagnostics >> On-Demand Self-Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

On-Demand Self-Test

NOTE: On-Demand Self-Test may be used to verify operation of a selected module.
  1. Connect New Generation Star (NGS) scan tester on Data Link Connector (DLC) and perform proper hook-up procedure. See EQUIPMENT HOOK-UP under COMMUNICATION NETWORK DIAGNOSTICS  .
  2. Turn ignition switch to ON position unless otherwise instructed. Rotate dial on scan tester to DIAGNOSTIC DATA LINK menu and press trigger.
  3. Rotate dial on scan tester to highlight the desired module to be tested and press trigger. Ensure DIAGNOSTIC TEST MODES is highlighted and press trigger.
  4. Rotate dial on scan tester to highlight ON-DEMAND SELF-TEST and press trigger. Press button No. 3 to start the test. Prepare vehicle for entry condition as specified for each module. Press trigger. Record any Diagnostic Trouble Codes (DTCs) that are displayed.
scientia non olet · About LEMON Manuals