LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1998 >> Contour Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Computer Relearn Procedures) >> Computer Relearn Procedures >> Contour & Mystique >> Key Programming - Without Using 2 Programmed Keys
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Key Programming - Without Using 2 Programmed Keys

WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 1999 Mercury Villager, 1999 Mercury Tracer, 1999 Mercury Sable, 1999 Mercury Mystique, and 1999 Mercury Mountaineer. However, it is still accessible from the selected car via links, so may be relevant.

Insert unprogrammed key in ignition and turn ignition switch to START position. Connect New Generation Star (NGS) tester to Data Link Connector (DLC), located under instrument panel next to steering column. Insert Ford Service Function (FSF) card in NGS tester. Perform security access procedure. See KEY PROGRAMMING - SECURITY ACCESS PROCEDURE. Select IGNITION KEY CODE PROGRAM. Turn ignition switch to LOCK position. Disconnect NGS tester. Key should now be programmed and be able to start vehicle.

scientia non olet · About LEMON Manuals