LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1998 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Computer Relearn Procedures) >> Computer Relearn Procedures >> Contour & Mystique >> Transmitter Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmitter Programming

WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 1999 Mercury Villager, 1999 Mercury Tracer, 1999 Mercury Sable, 1999 Mercury Mystique, and 1999 Mercury Mountaineer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to RUN position. Locate programming connector located next to electronic door lock module above glove box. Momentarily connect both terminals on programming connector. Horn will sound to verify program mode has been entered successfully. Press any button on remote transmitter.
  2. Horn will sound again to verify remote transmitter has been programmed successfully. To program additional remote transmitters, press any button on next remote transmitter. Horn will sound again to indicate new transmitters have been programmed. Turn ignition switch to LOCK position. Horn will sound again to confirm program mode has exited.
scientia non olet · About LEMON Manuals