Master Switch
Remove power window master switch (leave harness connected). Using a test light connected to ground, backprobe appropriate wire while actuating power window switch in specified positions. See appropriate MASTER SWITCH TESTING table. If test light does not illuminate at appropriate switch positions, replace power window master switch.
MASTER SWITCH TESTING
| Circuit Function | Wire Color | ||
|---|---|---|---|
| Left Front Window Down | White/Black | ||
| Left Front Window Up | Yellow | ||
| Right Front Window Down | Tan/Light Blue | ||
| Right Front Window Up | White/yellow | ||
| Left Rear Window Down | Yellow/Light Blue | ||
| Left Rear Window Up | Gray/Orange | ||
| Right Rear Window Down | Yellow/Black | ||
| Right Rear Window Up | Red/Black | ||
| Passenger Lock-Out | (1) Red/Light Blue | ||
|
|||
MASTER SWITCH TESTING
| Circuit Function | Wire Color |
|---|---|
| Left Window Down | Yellow |
| Left Window Up | White/Black |
| Right Window Down | Tan/Light Blue |
| Right Window Up | White/Yellow |