Contour & Mystique
WARNING: This page does not describe the selected car, but rather 29 other vehicles, including the 2000 Mercury Villager, 2000 Mercury Sable, 2000 Mercury Mystique, 2000 Mercury Mountaineer, and 2000 Mercury Grand Marquis. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch to RUN position. Locate programming connector located next to electronic door lock module above glove box. Momentarily connect both terminals on programming connector. Horn will sound to verify program mode has been entered successfully. Press any button on remote transmitter.
- Horn will sound again to verify remote transmitter has been programmed successfully. To program additional remote transmitters, press any button on next remote transmitter. Horn will sound again to indicate new transmitters have been programmed. Turn ignition switch to LOCK position. Horn will sound again to confirm program mode has exited.
NOTE:
After first remote transmitter is programmed, all other remote transmitters will be erased from memory. All remote transmitters must be programmed at the same time. Up to 4 transmitters may be programmed at one time.