LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1999 >> Contour SVT >> Repair and Diagnosis >> General Information >> Computer Relearn Procedures >> Computer Relearn Procedures >> Mustang >> Customer Driven Preferences
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customer Driven Preferences

There are customer preferences that can be configured on this vehicle. Some items the customer may or may not want to have enabled. To carry out customer configuration process, connect New Generation Star (NGS) tester to Data Link Connector (DLC), located under instrument panel next to steering column. Insert Ford Service Function (FSF) card into NGS tester. Using NGS tester, set customer preferences as necessary. See CUSTOMER PREFERENCE INDEX (MUSTANG) table.

NOTE: This procedure is used when a customer needs keys programmed into system and does not have 2 programmed ignition keys available, or when programmed ignition keys have been lost and/or ignition switch assembly has been replaced. This procedure will erase all programmed ignition keys from memory and prevent vehicle from starting until 2 keys have been programmed. Ignition keys must have correct mechanical key cut for vehicle and must be an encoded key. If additional key(s) are to be programmed, perform KEY PROGRAMMING - USING 2 PROGRAMMED KEYS. If remaining keys are with customer and not with vehicle, instruct customer to see owner's manual to program spare key(s).
scientia non olet · About LEMON Manuals