LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 1999 >> Taurus SHO >> Repair and Diagnosis >> General Information >> Computer Relearn Procedures >> Computer Relearn Procedures >> Town Car >> Transmitter Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Transmitter Programming

  1. Cycle ignition switch from LOCK to RUN positions 4 times within 3 seconds. Locks will lock and unlock to confirm programming mode has been entered. Press any button on remote transmitter.
  2. If additional remote transmitters are to be programmed, press any button on remaining remote transmitters within 7.5 seconds. To exit programming mode, turn ignition switch to START position or wait 7.5 seconds.
  3. To set a remote transmitter to also operate a memory set position, press SET button on memory switch then press any button on remote transmitter then press appropriate memory button (1 or 2). To unassociate a transmitter, repeat this step.
scientia non olet · About LEMON Manuals