LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Anti-Theft Systems - Passive >> Programming >> Programming Without Using 2 Programmed Keys
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming Without Using 2 Programmed Keys

NOTE: This procedure is used when customer needs extra keys programmed and 2 programmed keys are not available but system has 2 ignition keys programmed. A maximum of 8 keys can be programmed. If 8 keys are already programmed, this procedure will not allow any more to be programmed. The number of programmed key can be determined by accessing PCM PID NUMKEYS with NGS tester.

Insert unprogrammed key in ignition and turn ignition switch to START position. Connect New Generation Star (NGS) tester to Data Link Connector (DLC). Insert Ford Service Function (FSF) card in NGS tester. Perform security access procedure. See SECURITY ACCESS  . Select IGNITION KEY CODE PROGRAM. Turn ignition switch to OFF position. Disconnect NGS tester. Key should now be programmed and be able to start vehicle.

scientia non olet · About LEMON Manuals