Component Testing Procedure
WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
IGNITION SWITCH (11572) - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move key to these positions | A good switch will indicate |
|---|---|---|---|
| Run/Start power circuit | 4 and 1 | Off/Lock | Open circuit |
| Accessory | Open circuit | ||
| Run | Closed circuit | ||
| Start | Closed circuit | ||
| Run/Acc power circuit | 4 and 5 | Off/Lock | Open circuit |
| Accessory | Closed circuit | ||
| Run | Closed circuit | ||
| Start | Open circuit | ||
| Start power circuit | 4 and 7 | Off/Lock | Open circuit |
| Accessory | Open circuit | ||
| Run | Open circuit | ||
| Start | Closed circuit |