Component Testing Procedure
WARNING: This page is about a different car, the 2005 Mercury Mountaineer and 2005 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
MULTIFUNCTION SWITCH, TURN PORTION - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Turn signal | 4 and 7 | Left turn | Closed circuit |
| 4 and 8 | |||
| 4 and 5 | Right turn | Closed circuit | |
| 4 and 6 | |||
| Hazard | 1 and 5 1 and 6 1 and 7 1 and 8 |
Turn signal switch in neutral, Hazard On | Closed circuit |
| 1 and 5 1 and 6 1 and 7 1 and 8 |
Turn signal switch in neutral, Hazard off | Open circuit | |
| 2 and 6 2 and 7 |
Turn signal switch in neutral, Hazard Off | Closed circuit |