Component Testing Procedure
WARNING: This page is about a different car, the 2006 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
MULTIFUNCTION SWITCH, LAMP PORTION COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| High beam | 9 and 10 | High beam | Closed circuit |
| Flash-to-pass | Open circuit | ||
| Low beam | Open circuit | ||
| Low beam/Flash-to-pass | 9 and 12 | High beam | Open circuit |
| Flash-to-pass | Closed circuit | ||
| Low beam | |||
| 11 and 10 | High beam | Open circuit | |
| Flash-to-pass | Closed circuit | ||
| Low beam | Open circuit | ||
| Cornering lamp | 9 and 1 | Left turn | Closed circuit |
| Off | Open circuit | ||
| 9 and 3 | Right turn | Closed circuit | |
| Off | Open circuit |
MULTIFUNCTION SWITCH, LAMP PORTION COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Turn signal | 1, C202c and 2, C202c | Left turn, Hazard Off | Closed circuit |
| 1, C202c and 2, C202a | |||
| 4, C202c and 5, C202c | |||
| 4, C202c and 5, C202c | Right turn, Hazard Off | Closed circuit | |
| 1, C202c and 5, C202c | |||
| 1, C202c and 3, C202c | |||
| Hazard | 6, C202c and 10, C202c | Hazard On, Turn signal switch in neutral | Closed circuit |
| 1, C202c and 2, C202c | |||
| 1, C202c and 2, C202a | |||
| 1, C202c and 5, C202c | |||
| 1 C202c and 3, C202c | |||
| Stoplamps | 9, C202c and 10, C202c | Hazard Off, Turn signal switch in neutral | Closed circuit |
| 4, C202c and 2, C202a | |||
| 4, C202c and 5, C202c |