PCM Programming
WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 1999 Mercury Villager, 1999 Mercury Tracer, 1999 Mercury Sable, 1999 Mercury Mystique, and 1999 Mercury Mountaineer. However, it is still accessible from the selected car via links, so may be relevant.
For Powertrain Control Module (PCM) programming procedures, see ALL MODELS (PROGRAMMING PCM).
NOTE:
Permanent entry code programmed in driver's door module is taped to driver's door module or on wallet card provided with owner's manual.
NOTE:
Driver's Door Module (DDM) will erase all previously programmed remote transmitters when a new remote transmitter is programmed. If adding an additional remote transmitter, all existing remote transmitters must be reprogrammed at the same time.