LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Contour SVT >> Repair and Diagnosis >> External Pages >> Different car >> Section 331 (Engine Controls - Acceleration Control) >> Description And Operation >> Acceleration Control >> Component Location
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Location

WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E550 Super Duty, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Component Location Of Acceleration Control
G01540332Courtesy of FORD MOTOR CO.

The throttle is controlled by an accelerator cable attached to the accelerator pedal and shaft (9725). The accelerator pedal and shaft should travel smoothly from the idle to the wide open throttle positions. Hesitation on return or prevention of return to the idle position must not occur. Surrounding components such as wiring, hoses, sound insulator and floor carpet must not contact the sliding inner member of the accelerator cable or the accelerator pedal and shaft. The throttle assembly is not adjustable.