Specifications Index
CONTOUR & MYSTIQUE SPECIFICATIONS INDEX
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Axle Nut/Hub Nut | |||
| Front | 214 Ft. Lbs. (290 N.m) | ||
| Brakes | |||
| Bleeding Sequence | BLEEDING BRAKE SYSTEM | ||
| Disc Brakes | DISC BRAKE SPECIFICATIONS | ||
| Drum Brakes | DRUM BRAKE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | ON-VEHICLE TESTING | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Adjustment | BELT ADJUSTMENT | ||
| Belt Routing | DRIVE BELT ROUTING | ||
| Engine Cooling | |||
| General Service Specifications | COOLING SYSTEM SPECIFICATIONS | ||
| Radiator Cap Pressure | 13-18 Lbs. | ||
| Thermostat R & I | |||
| 2.0L 4-Cyl (VIN 3) | THERMOSTAT | ||
| Water Pump R & I | |||
| 2.0L 4-Cyl (VIN 3) | WATER PUMP | ||
| 2.5L V6 (VIN L & G) | WATER PUMP | ||
| Engine Mechanical | |||
| 2.0L 4-Cyl (VIN 3) | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | With engine at normal operating temperature, oil pressure should be 20-45 psi (1.4-3.2 kg/cm2 ) at 1500 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| 2.5L V6 (VIN L & G) | |||
| Compression | ENGINE COMPRESSION | ||
| Oil Pressure | With engine at normal operating temperature, oil pressure should be 20-45 psi (1.4-3.2 kg/cm2 ) at 1500 RPM. | ||
| Overhaul | ENGINE SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab.From Within Manager or Service, click the "30/60/90 Interval" or "Maint." button. | ||
| Flywheel/Flex Plate Torque | |||
| 2.0L 4-Cyl (VIN 3) | 81 Ft. Lbs. (110 N.m) | ||
| 2.5L V6 (VIN L) | 59 Ft. Lbs. (80 N.m) | ||
| Fuel System | |||
| Fuel Filter Location | Located on the leading edge of the fuel tank, mounted in a worm clamp. | ||
| Pressure Release Procedure | |||
| 2.0L 4-Cyl (VIN 3) | FUEL PRESSURE RELEASE & FUEL LINE CONNECTIONS | ||
| 2.5L V6 (VIN L & G) | FUEL PRESSURE RELEASE & FUEL LINE CONNECTIONS | ||
| Pressure Specification (KOEO) | FUEL PRESSURE -- CARS | ||
| Fuel Pressure Test Procedure | FUEL PRESSURE | ||
| Fuel Filter R & I | REMOVAL & INSTALLATION | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | HIGH TENSION WIRE RESISTANCE | ||
| Ignition Wires (Routing) | FIRING ORDER & TIMING MARKS | ||
| Spark Plugs | |||
| 2.0L 4-Cyl (VIN 3) | |||
| Type | Motorcraft No. AZFS-32FE | ||
| Gap | .048-.052 In. (1.20-1.32 mm) | ||
| Torque | 10-12 Ft. Lbs. (13-17 N.m) | ||
| 2.5L V6 (VIN L & G) | |||
| Type | Motorcraft No. AWSF-32F | ||
| Gap | .052-.056 In. (1.32-1.42 mm) | ||
| Torque | 7-15 Ft. Lbs. (10-20 N.m) | ||
| Starting | |||
| Starter | STARTER MOTOR SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel Alignment | |||
| Adjustment Specifications | WHEEL ALIGNMENT SPECIFICATIONS | ||
| Torque | TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 94 Ft. Lbs. (127 N.m) | ||