LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Escort Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Control System >> Bleeding Brake System >> Abs Bleeding Using Scan Tool
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Abs Bleeding Using Scan Tool

  1. This procedure is used to bleed Hydraulic Control Unit (HCU). Connect New Generation Star (NGS) Tester (077-00500) to Data Link Connector (DLC). Enter vehicle identification information. Ensure master cylinder reservoir is full and remains full during this procedure. Use DOT 3 brake fluid. Turn ignition on.
  2. Choose DIAGNOSTIC DATA LINK from menu selection. Next, choose ABS MODULE, then FUNCTION TEST. Prepare to bleed right rear bleeder. Depress and hold brake pedal to half of its travel. Select SERVICE BLEED and depress trigger of NGS. Bleed until clear, bubble-free fluid flows. Repeat procedure for left rear, right front and left front bleeders. Follow scan tool instructions until SERVICE BLEED PROCEDURE COMPLETE message is displayed.
scientia non olet · About LEMON Manuals