Inspection and Verification

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.

This part provides step-by-step module configuration procedures. Carry out the Programmable Module Installation when another workshop article part directs to carry out configuration or when DTCs from the below list are present:

DTC CHART

DTC	Description	Source	Action
B2477	Module Configuration Failure	ABS module Instrument cluster (IC) Parking aid module (PAM) Restraints control module (RCM) Vehicle security module (VSM)	CARRY OUT PMI. REFER to Programmable Module Installation .
B2900	VIN Mismatch	ABS module	REFER to VEHICLE DYNAMIC SYSTEMS article.
P0602	Powertrain Control Module Programming Error	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
P0605	Internal Control Module Read Only Memory (ROM) Error	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
P1639	Vehicle ID Block Corrupted, Not Programmed	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
U0300	Internal Control Module Software Incompatibility	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
U2050	No Application Present	ABS module IC PCM RCM VSM	CARRY OUT PMI. REFER to Programmable Module Installation .
U2051	One or More Calibration Files Missing / Corrupt	ABS module PCM	CARRY OUT PMI. REFER to Programmable Module Installation .