LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> Excursion 7.3 F, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 214 (Module Configuration System) >> General Procedures >> Programmable Module Installation >> Using the Vehicle Communication Module (VCM) When the Original Module is Not Available >> Step B
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Step B

WARNING: This page is about a different car, the 2005 Mercury Montego, 2005 Ford Freestyle, and 2005 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press the trigger.
  2. If the VCM asks for vehicle data, enter the vehicle data, then press store.
  3. The VCM asks for module data line 1. Enter the data and press store.
  4. The VCM then asks if there is an additional line of data available for that address. Select YES or NO depending on the information in the As Built Data Sheet.
  5. Repeat Steps  3 and  4 until the answer is NO for Step  4.
  6. The VCM should show a screen stating that the module data was stored. Press the trigger.
  7. Follow the on-screen instructions.
  8. SELECT: Restore Configuration - New ECU. Press the trigger.
  9. The VCM completes loading the retrieved data and displays Module Download Successful.
  10. Test the module for correct operation.
scientia non olet · About LEMON Manuals