LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2000 >> ZX2 Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - System & Engine Component Tests - EEC-V (Gasoline) >> Computerized Engine Controls >> Powertrain Control Module (Pcm) >> Power Circuits
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Circuits

Turn ignition off. Using a voltmeter, check for battery voltage between ground and PCM pin No. A44 (KAPWR) on LS or pin No. 55 (KAPWR) on all other models. Turn ignition switch to START or RUN position. Check for battery voltage between ground and VPWR fuse on LS or PCM connector pin No. 71 (VPWR). If battery voltage is not present, power is not being supplied from PCM power relay. See TEST B under SYSTEM TESTS in SELF-DIAGNOSTICS - EEC-V (GASOLINE) article.

POWERTRAIN CONTROL MODULE LOCATION

Application Location
Contour, Cougar, LS, Mystique, Sable, Taurus & Windstar Right Rear Of Engine Compartment, Mounted On Cowl
Continental Right Rear Of Engine Compartment, Under Cowl Cover
Crown Victoria, Grand Marquis & Town Car Left Side Of Master Cylinder, Mounted On Cowl
Econoline Left Rear Of Engine Compartment, Near Brake Master Cylinder
Escort Center Of Instrument Panel, Below Center Console
Excursion & Super-Duty Behind Left Side Of Instrument Panel, Near Brake Pedal
Expedition, Explorer, Mountaineer, Navigator & Ranger Right Rear Of Engine Compartment, Mounted On Cowl
Focus & Mustang Behind Right Kick Panel
F150 & F250 Right Rear Of Engine Compartment
Fig 1: Identifying Powertrain Control Module (PCM) Connector Pins (Except LS)
G96E29185
Fig 2: Identifying Powertrain Control Module (PCM) Connector Pins (LS)
G00011081Courtesy of FORD MOTOR CO.