Component testing procedure
WARNING: This page is about a different car, the 2010 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
MULTIFUNCTION SWITCH, LAMP PORTION - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| High beam | 9 and 10 | High beam | Closed circuit |
| Flash-to-pass | Open circuit | ||
| Low beam | |||
| Low beam/Flash-to-pass | 11 and 10 | High beam | Open circuit |
| Flash-to-pass | Closed circuit | ||
| Low beam | Open circuit | ||
| Low beam/Flash-to-pass | 9 and 1 | Left turn | Closed circuit |
| Off | Open circuit | ||
| Low beam/Flash-to-pass | 9 and 3 | Right turn | Closed circuit |
| Off | Open circuit |
MULTIFUNCTION SWITCH, LAMP PORTION - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Turn signal | 9 and 10 (C202c) | Left turn. Hazard off | Closed circuit |
| 1 (C202c) and 2 (C202a) | |||
| 1 and 2 (C202c) | |||
| 9 and 10 (C202c) | Right turn, Hazard off | Closed circuit | |
| 1 and 5 (C202c) | |||
| 1 and 3 (C202c) | |||
| Stoplamps | 4 (C202c) and 2 (C202a) | Turn signal switch in neutral, Hazard off | Closed circuit |
| 4 and 5 (C202c) | |||
| Hazard | 6 and 10 (C202c) | Hazard on, Turn signal switch in neutral | Closed circuit |
| 1 and 2 (C202c) | |||
| 1 (C202c) and 2 (C202a) | |||
| 1 and 5 (C202c) | |||
| 1 and 3 (C202c) | |||
| 4 (C202c) and 2 (C202a) | Open circuit | ||
| 4 and 5 (C202c) |