Instrument Cluster Programming Procedure "C"

WARNING: This page does not describe the selected car, but rather 98 other vehicles, including the 2001 Saturn SW2, 2001 Saturn SL2, 2001 Saturn SL1, 2001 Saturn SL, and 2001 Saturn SC2. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: After Hybrid Electronic Instrument Cluster (HEC) has been replaced, PCM ID MUST be reset and Passive Anti-Theft System (PATS) parameter reset procedure MUST be performed. See SECURITY ACCESS PROCEDURE .

Perform security access for instrument cluster. See SECURITY ACCESS PROCEDURE . Using NGS tester, select PARAMETER RESET command for instrument cluster. Using NGS tester, select PARAMETER RESET command for PCM. Disconnect negative battery cable and wait 3 minutes for PCM Keep Alive Memory (KAM) to clear. Reconnect negative battery cable. Cycle ignition switch from OFF to ON position using 2 encoded ignition keys. Both PATS keys and PCM ID should be set in instrument cluster.