General Specifications
WARNING: This page is about a different car, the 2011 Mercury Milan, 2011 Lincoln MKZ, and 2011 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| A/C Compressor Oil | |
|
NOTE:
Use of any A/C compressor oil other than what is specified for the specific vehicle configuration will damage the A/C compressor and contaminate the refrigerant system. For non-hybrid vehicles with a pulley driven (conventional) A/C compressor, PAG Refrigerant Compressor Oil only must be used. For hybrid vehicles with an electric A/C compressor, Motorcraft® Electric A/C Compressor Oil must be used.
|
|
MATERIAL SPECIFICATIONS
| Item | Specification | Fill Capacity |
|---|---|---|
| Motorcraft® Electric A/C Compressor Oil YN-32 |
- | Hybrid vehicles only 130 ml (4.4 fl oz) |
| Motorcraft® PAG Refrigerant Compressor Oil YN-12-D |
WSH-M1C231-B | Non-hybrid vehicles only 177 ml (6 fl oz) |
| Motorcraft® R-134a Refrigerant YN-19 (US); CYN-16-R (Canada) |
WSH-M17B19-A | 0.62 kg (22 oz) (1.38 lb) |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Magnetic Clutch | |
| Air gap between pulley and clutch disc | 0.3-0.6 mm (0.012-0.024 in) |
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| A/C compressor bolts | 25 | 18 | - |
| A/C compressor bracket bolts | 25 | 18 | - |
| A/C compressor clutch disc and hub bolt | 14 | - | 124 |
| A/C compressor discharge fitting nut (hybrid) | 15 | - | 133 |
| A/C compressor manifold bolt | 15 | - | 133 |
| A/C compressor nut | 25 | 18 | - |
| A/C compressor stud | 9 | - | 80 |
| A/C compressor suction fitting nut (hybrid) | 15 | - | 133 |
| A/C pressure relief valve | 10 | - | 89 |
| A/C pressure transducer | 10 | - | 89 |
| Auxiliary coolant flow pump bracket bolts | 25 | 18 | - |
| Compressor manifold and tube suction fitting nut | 15 | - | 133 |
| Condenser fitting nut (inlet and outlet) | 15 | - | 133 |
| Condenser-to-evaporator line fitting nut | 15 | - | 133 |
| Evaporator outlet line fitting nut | 15 | - | 133 |
| Evaporator-to-compressor suction line bracket bolt | 6 | - | 53 |
| Heater core and evaporator core housing nuts | 9 | - | 80 |
| High-pressure Schrader-type valve | 2.5 | - | 22 |
| High-pressure service gauge port valve cap | 0.8 | - | 7 |
| Low-pressure Schrader-type valve | 1.8 | - | 16 |
| Low-pressure service gauge port valve cap | 0.8 | - | 7 |
| Radiator bracket bolts | 10 | - | 89 |
| Thermostatic Expansion Valve (TXV) fitting nut | 15 | - | 133 |
| TXV manifold and tube bracket bolt | 8 | - | 71 |
| Washer reservoir filler neck bolt | 6 | - | 53 |