Programmable Module Installation Procedure
WARNING: This page does not describe the selected car, but rather 32 other vehicles, including the 2003 Mercury Sable, 2003 Mercury Mountaineer, 2003 Mercury Marauder, 2003 Mercury Grand Marquis, and 2003 Lincoln Town Car. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
NGS tester will only store module configuration information for 24 hours.
Prior to removal of applicable programmable module, perform Programmable Module Installation (PMI) procedure by uploading module configuration information to New Generation Star (NGS) tester using manufacturer's instructions. Once new programmable module has been installed in vehicle, download module configuration information from NGS tester into new module. On some models, module configuration information is also retained in Powertrain Control Module (PCM). If module information cannot be accessed from module, use NGS tester with Ford Service Function (FSF) card and flash cable to upload module configuration information from PCM following scan tool instructions.