Module Configuration
WARNING: This page is about a different car, the 2004 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
- Load the CD from the diagnostic tester.
- Select the "Module Configuration" menu.
- Select the relevant module. The vehicle data must be read off before the module is removed.
- Read off the module code and/or vehicle data from the defective module.
- Remove the defective module and install the new module as described in the operation
- generic control module (GEM)
- instrument cluster
- restraint control module (RCM)
- powertrain control module (PCM)
- Using the diagnostic tester, configure the new module according to the model variant.
- Separate the diagnostic tester from the DLC.
- Check the operation of the relevant system(s).