Step B
WARNING: This page is about a different car, the 2004 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
- Press trigger.
- If the NGS asks for vehicle data - enter the vehicle data then press store.
- The NGS will ask for module data line 1 - enter data and press store.
- The NGS will then ask if there is an additional line of data available for that address - Select YES or NO depending on the information in the As Built Data Sheet.
- Repeat Steps 3 and 4 until the answer is NO for Step 4.
- The NGS should show a screen stating that module data was stored - press trigger.
- Follow the on-screen instructions.
- SELECT: Restore Configuration - New ECU then press trigger.
- The NGS will complete loading the entered data.