Master Power Window Control Switch
Remove master power window control switch from vehicle. See POWER WINDOW SWITCH under REMOVAL & INSTALLATION. Check continuity between specified terminals while operating switch to specified position. See MASTER POWER WINDOW CONTROL SWITCH TESTING table. See Figure. If continuity is not as specified, replace master power window control switch.
MASTER POWER WINDOW CONTROL SWITCH TESTING
| Switch Position | Between Terminals No. | Continuity | |||
|---|---|---|---|---|---|
| One-Touch Down | |||||
| Down | 4 & (1) 8 | Yes | |||
| Neutral | 4 & (1) 8 | No | |||
| Lock-Out Circuit | |||||
| Locked | 1 & 4 | Yes | |||
| Unlocked | 1 & 4 | No | |||
| Driver's Side | |||||
| Up | 4 & (1) 6 | Yes | |||
| Down | 4 & (1) 7 | Yes | |||
| Neutral | 2 & (1) 6; 2 & (1) 7 | Yes | |||
| Passenger's Side | |||||
| Up | (1) 3 & 4 | Yes | |||
| Down | (1) 4 & 4 | Yes | |||
| Neutral | 2 & (1) 3; 2 & (1) 4 | Yes | |||
| Left Rear | |||||
| Up | 4 & 6 | Yes | |||
| Down | 4 & 5 | Yes | |||
| Neutral | 2 & 5; 2 & 6 | Yes | |||
| Right Rear | |||||
| Up | (1) 2 & 4 | Yes | |||
| Down | 3 & 4 | Yes | |||
| Neutral | 2 & 3; (1) 2 & 2 | Yes | |||
|
|||||