Door Window Height Stop Adjustment
- Remove front door trim panel and front door inside panel sound insulator. Lower door window 3.00" (76.2 mm) from full up position. Loosen nut and washer assemblies securing window regulator equalizer arm bracket to front door inner panel.
- With front door open, place hands on each side of window glass and pull fully rearward into door glass top runner. Tighten nut and washer assembly securing front of window regulator equalizer arm bracket.
- Apply downward pressure on window regulator equalizer arm bracket. If hole is a vertical slotted hole, ensure nut and washer securing rear of window regulator equalizer arm bracket is positioned at bottom of slot as you apply downward pressure. Tighten remaining nut and washer assemblies to 62-89 INCH lbs. (7-10 N.m). Open and close window to verify proper operation.