LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Windstar Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seating System >> Disassembly And Assembly >> Front Seat Backrest >> Assembly >> All vehicles
April 5, 2026: LEMON Manuals is launched! Read the announcement.

All vehicles

  1. Install the trim cover on the pad.
  2. Install the springs.
    Fig 1: Installing Springs
    G03427014Courtesy of FORD MOTOR CO.

    Vehicles with side air bags 

    3. WARNING: Inspect the mounting surfaces of the side air bag module and the seat backrest frame mounting bracket for any foreign objects before installing the side air bag module. If any foreign objects are found, remove them. Failure to do so may result in personal injury in the event of an air bag deployment.
    WARNING: Inspect the side air bag cavity in the seat backrest pad for any foreign objects. If any foreign objects are found, remove them. Failure to do so may result in personal injury in the event of an air bag deployment.
    WARNING: Before installing the side air bag module, check it for damage and foreign objects. If the air bag module is damaged, replace it. If any foreign objects are found, remove them. Failure to do so may result in personal injury in the event of an air bag deployment.
    Fig 2: Installing Side Air Bag Module And Screws
    G03427015Courtesy of FORD MOTOR CO.
  3. Install the side air bag module and the screws.
  4. Route the side air bag module wiring as noted during removal. Install the pin-type retainer.

    All vehicles 

  5. Install the headrest guide rod sleeve.
  6. Install the seat trim.
  7. Install the screws.
    Fig 3: Installing Screws
    G03427016Courtesy of FORD MOTOR CO.
  8. Install the screw covers.
    Fig 4: Installing Screw Covers
    G03427017Courtesy of FORD MOTOR CO.
  9. Install the headrest.
    Fig 5: Installing Headrest
    G03427018Courtesy of FORD MOTOR CO.
  10. Install the armrest stud and guide pin.
    Fig 6: Installing Armrest Stud And Guide Pin
    G03427019Courtesy of FORD MOTOR CO.
  11. Install the armrest.
    Fig 7: Installing Armrest
    G03427020Courtesy of FORD MOTOR CO.
  12. Install the Front Seat Backrest. Refer to FRONT SEAT BACKREST  in the Removal and Installation portion of this section.
  13. Install the affected seat. For additional information, DRIVER SEAT  or PASSENGER SEAT  in the Removal and Installation portion of this section.
  14. Repower the SRS. Refer to ACTIVATING SYSTEM .
  15. Check the active restraint system for correct operation.
scientia non olet · About LEMON Manuals