LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2002 >> Windstar Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1062 (Module Configuration) >> General Procedures >> Programmable Module Installation >> Using the Vehicle Communication Module (VCM) When the Original Body Chassis Electrical Module is Not Available >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using the Vehicle Communication Module (VCM) When the Original Body Chassis Electrical Module is Not Available: Notes

WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new module.
  2. Using the VCM and the latest version of the service function card, SELECT: Programmable Module Installation.
  3. Select the module being installed.
  4. Follow the on-screen instructions.
  5. SELECT: Retrieve Module Configuration - Old ECU and press trigger.
  6. Follow the on-screen instructions.
  7. The VCM attempts to retrieve the module data.
    • If the module data is available, go to STEP A .
    • If the VCM displays: Call As-Built Data Center, go to STEP B .
scientia non olet · About LEMON Manuals