Inspection and Verification

WARNING: This page is about a different car, the 2007 Mercury Mariner and 2007 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

This section provides step-by-step module configuration procedures. Carry out the PMI procedures in this article when another workshop manual section directs to carry out configuration or when DTCs from the below list are present:

DIAGNOSTIC TROUBLE CODE (DTC) INDEX

DTC	Description	Source	Action
B2477	Module Configuration Failure	Anti-lock brake system (ABS) module Parking aid module Restraints control module (RCM) Smart junction box (SJB)	CARRY OUT PMI. REFER to Programmable Module Installation .
B2900	VIN Mismatch	ABS module	CARRY OUT PMI. REFER to Programmable Module Installation .
P0602	Powertrain Control Module Programming Error	Powertrain control module (PCM)	CARRY OUT PMI. REFER to Programmable Module Installation .
P0605	Internal Control Module Read Only Memory (ROM) Error	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
P1635	Tire/Axle Out of Acceptable Range	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
P1639	Vehicle ID Block Corrupted, Not Programmed	PCM	CARRY OUT PMI. REFER to Programmable Module Installation .
U0300	Internal Control Module Software Incompatibility	PCM Traction battery control module (TBCM)	CARRY OUT PMI. REFER to Programmable Module Installation .
U2050	No Application Present	PCM SJB TBCM	CARRY OUT PMI. REFER to Programmable Module Installation .