Valve Clearance: Notes

CAUTION: Shims and tappets are location-specific. Use a permanent type marker to note tappet and shim locations. DO NOT scratch or use paint to mark tappets or shims, or incorrect lash adjustments and/or severe engine damage may result.

NOTE: To identify vehicles equipped with 2.0L (VIN 3), 3.0L (VIN S) and 3.9L (VIN A) engines, see FORD MOTOR CO. - INTRODUCTION - CARS article.

All models except 2.0L (VIN 3), 3.0L (VIN S) and 3.9L (VIN A) are equipped with hydraulic valve lifters. No adjustments are required. If valves are noisy or incorrect clearance is suspected, components are worn. Check collapsed valve lifter clearance. See appropriate article in ENGINES.