Component Testing Procedure
WARNING: This page is about a different car, the 2006 Ford F550 Super Duty, 2006 Ford F450 Super Duty, and 2006 Ford Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
MULTIFUNCTION SWITCH, TURN PORTION COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Turn signal | C202a, 2 and C202b, 10 C202a, 2 and C202b, 9 |
Left turn | Closed circuit |
| Off | Open circuit | ||
| C202a, 2 and C202b, 8 C202a, 2 and C202b, 7 |
Right turn | Closed circuit | |
| Off | Open circuit | ||
| Hazard | C202a, 3 and C202b, 7 | Turn signal switch in neutral, Hazard On | Closed circuit |
| C202a, 3 and C202b, 8 | |||
| C202a, 3 and C202b, 9 | |||
| C202a, 3 and C202b, 10 | |||
| C202a, 1 and C202b, 8 | Turn signal switch in neutral, Hazard Off | Closed circuit | |
| C202a, 1 and C202b, 7 |