Inspection and Verification
WARNING: This page is about a different car, the 2003 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Visually inspect for obvious signs of electrical damage. Refer to the following chart:
- If the concern remains after inspection, connect the diagnostic tool to the data link connector (DLC) located beneath the instrument panel and select the vehicle to be tested from the diagnostic tool menu. If the diagnostic tool does not communicate with the vehicle:
- Check that the program card is correctly installed.
- Check the connections to the vehicle.
- Check that the ignition switch is in the RUN position.
- If the diagnostic tool still does not communicate with the vehicle, refer to MODULE COMMUNICATIONS NETWORK .
- Refer to the SYMPTOM CHART .