Customer Preference Items
WARNING: This page is about a different car, the 2003 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
If using the WDS, select Module Configuration and Programming, then follow the screen prompts.
NOTE:
Make sure module is listed as supporting customer preference items and supports the specific item to be configured in the MODULE CONFIGURATION INDEX .
- Select Service Bay Functions on the diagnostic tool.
- Select the module that contains the customer preference item to be programmed. Refer to the MODULE CONFIGURATION INDEX .
- Select Customer Preference Items on the diagnostic tool.
- Select Module Option Content.
- Select the item to be enabled or disabled.
- Enable or disable the item as necessary to reflect the customer preference.