Spring Lock Couplings: Disconnection

WARNING: Do not smoke or carry lighted tobacco or open flame of any type when working on or near any fuel related components. Highly flammable vapors are always present and may ignite. Failure to follow these instructions may result in personal injury.

WARNING: The fuel system remains pressurized for a long time after the ignition is switched off. The fuel pressure must be relieved before attempting any repairs. Failure to follow these instructions may result in personal injury.

Relieve the fuel pressure. For additional information, refer to FUEL SYSTEM PRESSURE RELEASE .
Remove the safety clips from the spring lock couplings.

Fig 1: Removing Safety Clips From Spring Lock Couplings
Courtesy of FORD MOTOR CO.
Install the spring lock coupling tools.

Fig 2: Installing Spring Lock Coupling Tools
Courtesy of FORD MOTOR CO.
Close and push the spring lock coupling tool into the open side of the cage.

Fig 3: Closing And Pushing Spring Lock Coupling Tool Into Open Side Of Cage
Courtesy of FORD MOTOR CO.
Separate the fitting.

Fig 4: Separating Fitting
Courtesy of FORD MOTOR CO.
Remove the spring lock coupling tool.

Fig 5: Removing Spring Lock Coupling Tool
Courtesy of FORD MOTOR CO.