LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> Windstar Limited >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Acceleration Control System >> Diagnosis And Testing >> Acceleration Control >> Inspection and Verification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection and Verification

NOTE: Some vehicles are equipped with adjustable brake and accelerator pedals. These pedals are serviced as an assembly. For additional information on diagnosing and testing this component, refer to HYDRAULIC BRAKE ACTUATION .
NOTE: Care should be exercised when carrying out service on or around the accelerator pedal linkage and controls.
  1. Inspect the accelerator pedal and shaft (9725) and attaching linkage for damage or distortion which would bind or limit accelerator travel.
  2. Inspect the accelerator cable (9A758) for kinks or fraying which may cause binding.
  3. Inspect the engine idle speed adjustment to make sure of correct idle speed specification after any accelerator linkage adjustment or repair.
  4. Inspect throttle body (9E926) for excessive wear or damage.