Powertrain Control Module Reset: Description

All OBD-II scan tools support Powertrain Control Module (PCM) reset. The PCM Reset allows the scan tool to command the PCM to clear all emission-related diagnostic information. When resetting the PCM, a DTC P1000 will be stored in the PCM until all the OBD-II system monitors or components have been tested to satisfy a drive cycle, without any other faults occurring. See DRIVE CYCLES .

The following events occur when a PCM reset is performed:

• Clears the number of Diagnostic Trouble Codes (DTCs).
• Clears the DTCs.
• Clears the freeze frame data.
• Clears diagnostic monitoring test results.
• Resets status of the OBD-II system monitors.
• Sets DTC P1000.