LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> ZX2 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 664 (Module Configuration) >> General Procedures >> Programmable Module Installation >> Using The New Generation STAR (NGS) Tester When The Original Body Chassis Electrical Module Is Not Available >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using The New Generation STAR (NGS) Tester When The Original Body Chassis Electrical Module Is Not Available: Notes

WARNING: This page is about a different car, the 2004 Ford RV Cutaway, 2004 Ford Econoline, 2004 Ford E450 Super Duty, and 2004 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new module.
  2. Using the NGS tester and the latest version service function card, SELECT: Programmable Module Installation.
  3. Select: the module being installed.
  4. Follow the on-screen instructions.
  5. SELECT: Retrieve Module Configuration - Old ECU and press trigger.
  6. Follow the on-screen instructions.
  7. The NGS will attempt to retrieve module data from the powertrain control module (PCM).
    • If the module data is available go to STEP A .
    • If the NGS displays: Call As-Built Data Center go to STEP B