LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Ford >> 2003 >> ZX2 Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Acceleration Control >> Removal And Installation >> Cable Bracket - 2.0L SPI >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cable Bracket - 2.0L SPI: Removal

  1. Disconnect the accelerator cable (9A758) from the throttle control lever (9A776) and the accelerator cable bracket (9723).
    1. Disconnect the cable housing from the accelerator cable bracket.
    2. Disconnect the accelerator cable end from the throttle control lever.
    3. Position the accelerator cable aside.
    Fig 1: Disconnecting Accelerator Cable
    G01372767Courtesy of FORD MOTOR CO.
  2. Disconnect the speed control actuator cable (9A825) from the throttle control lever.
    1. Disconnect the speed control actuator cable from the throttle control lever.
    2. Remove the bolt.
    Fig 2: Disconnecting Speed Control Actuator Cable
    G01372768Courtesy of FORD MOTOR CO.
  3. Remove the accelerator cable bracket.
    1. Remove the bolts.
    2. Remove the accelerator cable bracket.
    Fig 3: Removing Accelerator Cable Bracket
    G01372769Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals